双材料界面裂纹的加料有限元方法

为解决求解双材料界面裂纹应力强度因子等断裂参量的困难,在常规单元位移模式中引入界面裂纹尖端位移场,构建加料界面裂纹单元和过渡单元的位移模式,推出了加料有限元方程。采用不同的加料单元和过渡单元配置方案,建立了方形板中心界面裂纹和矩形板单边斜界面裂纹的加料有限元模型,求解有限元方程直接得到应力强度因子,与解析解的结果对比,表明该方法具有较高的精度,可方便地推广应用于界面裂纹的计算分析中。     

粘弹性增量界面元法

采用界面元模型,推导了粘弹性增量界面元列式。算例表明,粘弹性增量界面元法能有效地用于粘弹性不连续介质问题的分析。     

钢筋混凝土外粘钢板结构裂缝的有限元数值模拟

随着高技术武器的不断发展,防护工程正面临着前所未有的威胁和挑战,新型防护结构及材料已经成为研究的热点。针对这一实际背景,运用ANSYS大型有限元软件,采用数值模拟的方法对普通钢筋混凝土结构和外粘钢板混凝土结构在相同均布面荷载作用下的变形、钢筋应力以及结构裂缝的开展情况进行了比较。结果表明外粘钢板的钢筋混凝土结构能够大大增强结构的抗力,并且有效的抑制了裂缝的开展。     

TETRA数字集群宽带化演进

TETRA数字集群空中接口所涉及的调制方式、传输速率、信道编解码和高层协议等方面的标准化工作是在支持原有话音业务的基础上,以支持分组数据和多媒体业务为新的服务目标,为满足宽带化通信需求进行的改进和完善。     

粘弹性界面裂纹相似界面单元聚缩解

提出了粘弹性界面裂纹分析的相似界面单元聚缩解法。该方法在裂纹尖端附近划分相似界面单元,多层相似单元形成一个子结构;然后利用相似界面单元具有类似刚度矩阵的特点,将子结构内的大量自由度聚缩后再求解。作为算例,求解了双粘弹性材料和弹—粘弹性材料矩形板单边裂纹的拉伸问题。     

物理弱间断线上Ⅲ型斜交裂纹高阶渐近场

针对功能梯度材料层/均匀材料基体的物理弱间断线上斜交裂纹,通过分离变量和级数展开法构造位移函数,求得了裂纹尖端高阶渐近场。其界面裂纹尖端高阶渐近应力场具有与均匀材料相同的r-1/2的奇异性。由高阶项的表达式可知：材料非均匀性对应力场有显著影响。数学上,该解为此类问题的特征函数,能够描述此类材料各种含裂纹结构的整个应力场和位移场,当非均匀参数为零时,它可以退化到均匀材料反平面裂纹问题经典的W il-liam s解。     

Inventory financing under Risk-Adjusted-Return-On-Capital criterion

Risk-Adjusted-Return-On-Capital (RAROC) is a loan-pricing criterion under which a bank sets the loan term such that a certain rate of return is achieved on the regulatory capital required by the Basel regulation. Some banks calculate the amount of regulatory capital for each loan under the standardized approach (“standardized banks,” the regulatory capital is proportional to the loan amount), and others under the internal rating-based (IRB) approach (“IRB banks,” the regulatory capital is related to the Value-at-Risk of the loan). This article examines the impact of the RAROC criterion on the bank's loan-pricing decision and the retailer's inventory decision. We find that among the loan terms that satisfy the bank's RAROC criterion, the one that benefits the retailer the most requires the bank to specify an inventory advance rate in addition to the interest rate. Under this loan term, the retailer's inventory level is more sensitive to his asset level when facing an IRB bank compared to a standardized bank. An IRB (standardized) loan leads to higher profit and inventory level for retailers with high (low) asset. For retailers with medium asset, an IRB loan results in a higher retailer profit but a lower consumer welfare. Calibrated numerical study reveals that the benefit of choosing standardized banks (relative to IRB banks) can be as high as 30% for industries with severe capital constraints, volatile demands, and low profit margins, highlighting the importance for retailers to carefully choose the type of banks to borrow from. When the interest rate is capped by regulation, retailers borrowing from a standardized bank are more likely to be influenced by the interest rate cap than those borrowing from an IRB bank. Under strong empire-building incentives (the bank will offer loan terms to maximize the size of the loan), retailers with medium initial asset level shift their preference from IRB banks to standardized banks.     

Selling to strategic and loss‐averse consumers: Stocking,procurement, and product design policies

Motivated by the presence of loss‐averse decision making behavior in practice, this article considers a supply chain consisting of a firm and strategic consumers who possess an S‐shaped loss‐averse utility function. In the model, consumers decide the purchase timing and the firm chooses the inventory level. We find that the loss‐averse consumers' strategic purchasing behavior is determined by their perceived gain and loss from strategic purchase delay, and the given rationing risk. Thus, the firm that is cognizant of this property tailors its inventory stocking policy based on the consumers' loss‐averse behavior such as their perceived values of gain and loss, and their sensitivity to them. We also demonstrate that the firm's equilibrium inventory stocking policy reflects both the economic logic of the traditional newsvendor inventory model, and the loss‐averse behavior of consumers. The equilibrium order quantity is significantly different from those derived from models that assume that the consumers are risk neutral and homogeneous in their valuations. We show that the firm that ignores strategic consumer's loss‐aversion behavior tends to keep an unnecessarily high inventory level that leads to excessive leftovers. Our numerical experiments further reveal that in some extreme cases the firm that ignores strategic consumer's loss‐aversion behavior generates almost 92% more leftovers than the firm that possesses consumers’ loss‐aversion information and takes it into account when making managerial decisions. To mitigate the consumer's forward‐looking behavior, we propose the adoption of the practice of agile supply chain management, which possesses the following attributes: (i) procuring inventory after observing real‐time demand information, (ii) enhanced design (which maintains the current production mix but improves the product performance to a higher level), and (iii) customized design (which maintains the current performance level but increases the variety of the current production line to meet consumers’ specific demands). We show that such a practice can induce the consumer to make early purchases by increasing their rationing risk, increasing the product value, or diversifying the product line. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 435–453, 2015     

一种定征层状平面结构界面粘接强度的兰姆波方法

置于层状平面结构表面的斜劈超声换能器被用于激发和接收多模兰姆波。文章首先分析了采用多模兰姆波的幅频特性定征界面粘接强度的可行性。基于Ritec-SNAP 超声测量系统,建立了采用兰姆波方法定征层状结构界面粘接强度的实验系统。对于给定的层状平面结构,将粘接层的固化过程用于模拟粘接层界面强度的变化过程。对于不同的粘接层固化时间,实验测得的多模兰姆波幅频曲线明显不同。借助于声——超声技术中的应力波因子,给出了兰姆波应力波因子的定义。实验结果显示,兰姆波应力波因子与间接表示界面粘接强度的固化时间之间存在确定的单调对应关系,表明将多模兰姆波的应力波因子用于定征层状平面结构的界面粘接强度是可行的。     

烧蚀材料对辐射烧蚀驱动的Richtmyer Meshkov不稳定性影响

在惯性约束聚变靶丸内爆过程中,辐射烧蚀所产生的冲击波经过带有扰动的界面时,会触发Richtmyer-Meshkov不稳定性。惯性约束聚变内爆靶丸一般使用掺杂的CH塑料或者掺杂的Be材料作为烧蚀层,为了探索Be和CH塑料烧蚀层对Richtmyer-Meshkov不稳定性抵抗能力,对界面预制单模正弦扰动的双层靶中Richtmyer-Meshkov不稳定性发展过程进行了理论分析与数值模拟。理论分析认为Richtmyer-Meshkov不稳定性线性增长率和X射线辐射温度、界面扰动波长、扰动振幅以及烧蚀层密度有较大关系。使用辐射流体力学程序对辐射温度高达100 eV的黑体谱X射线烧蚀界面带有扰动的双层靶进行了模拟。模拟结果表明,在相同的辐射烧蚀条件下,CH塑料/泡沫(CH/Foam)靶界面扰动增长比Be/Foam快,密度较大的Be对Richtmyer-Meshkov不稳定性具有更强的抵抗能力。该研究结果对惯性约束聚变内爆靶丸的设计具有重要的参考价值。